Syvecs Forums

Thanks for that Steve!
Got it working! Moved my Calswitch to the same place as yours, set up the PLEX again copying yours and its working! Not to rub it in but also displaying the flag when a change cal!

Little annoyance sorted! So in the syvecs it would appear it does matter where you put the ...

So this might be a email to plex issue, but thought id ask you steve since i know you have experience with the Plex stuff!

Since changing the CAN transmit data on the dash, everything works as expected bar 1 annoying thing. Iv lost the ability to show what CAL im in?

Now from what i can see the ...

Defiantly something il look into, i need something with GPS and IMU!

So got it working!
Well the receive side is, still need to figure out the transmit for the Cal and Buttons but thats another nights job!
So, more i thought about it, i am wanting to potentially add the GPS unit in down the line and i have no idea if the plex style transmit content would affect it ...

Ok, so had a dig through my emails and it turns out that the frame content was sent to me by PLEX, so that clears up why mine is like that.
No real issue imo as long as i can figure out how to set the TD to look for them in the right place.

As far as i can see the Receive index is populated ...

Im not sure in with what regard, i sent him the photos i attached in here and he noticed it right away, i said i copy'd the info over from the S6 that i first started this project on and he said it wasnt that ether? I did have a look through my thread see if i did anything or got anyone to mod it ...

Yeh iv tried that, and it doesnt work,

Iv been in contact with martin, and he is currently on holiday but he basically said the output from the ECU isnt default S7 so thats why its not talking. He said that its going to have to be entered manually so gave me some things to try figure it out but if ...

Just this and the dash, and yeh when i plug in the TD in the plex still reads as normal (well i can only confirm the coolant and oil temp readings as i cant start the car just now)

I bought this for the programmable buttons and cal switchs, so i can program the DSG drive modes to the buttons and ...

Ok, so out my depth yet again! :lol:

I have a S7+ ECU, running the new dedicated DSG software, so this uses CAN1 for the gearbox control so nothing else can go on that CAN1 line.

I have a Plex SDM330 dash on CAN2 and it works as to be expected.
I have added the Tinydash onto CAN2.

I set it all ...

Thanks Stevie,

It did but this current fitted box TCU is flashed with a "stage 4" retrofit file from TVS, as the box is fitted with the TVS stage 2 clutches.

They sound very whip like but are not as harsh in real world, they are quick and firm thats for sure, but i could remove the gear cut all ...