NTK L2H2 New Linearisation

RICE RACING · Post by **RICE RACING** » Thu Nov 14, 2024 10:29 am

I also tested multiple MoWreC PLM'z
as most shops would use one out of the box with most ghetto set up (pretty average results as to be expected)
there are some big flawz in the way they work (unstable readingz) but as said before for hobby wannabe motorsportz they are tolerable and fit for purpose
once fitted the RR sensor and bespoke set up can be made to read in extended ranges with ease (down to 0.585L) and are not a bad unit if you are stuck with one or only listen to podz bullshit spread by shillz 'cash for comments', will be supplying sensorz for these once finished testing but as said to anyone who asks if you are serious just buy a fucking *SYVECS LAMBDA TO CAN UNIT and RR CALIBRATED SENSOR or 8 !*

: WhatsApp Image 2024-11-05 at 10.58.16.jpeg (185.3 KiB) Viewed 15548 times

: WhatsApp Image 2024-11-05 at 10.58.15.jpeg (245.17 KiB) Viewed 15548 times

: WhatsApp Image 2024-11-05 at 10.58.13.jpeg (245.75 KiB) Viewed 15548 times

beetos · Post by **beetos** » Tue Nov 19, 2024 12:10 am

Now THATZ what I’m talking about !!! The real deal here folks.

RICE RACING · Post by **RICE RACING** » Thu Jan 09, 2025 10:39 pm

Merry New Year Kuntz !

I have some mildly arousing developments that will share here............ will get everyone hard hopefully

stay tuned !

RICE RACING · Post by **RICE RACING** » Sun Jan 19, 2025 1:27 am

can run all 8 go ahead and try

: WhatsApp Image 2025-01-15 at 19.13.05.jpeg (209.88 KiB) Viewed 13421 times

: WhatsApp Image 2025-01-15 at 19.13.03(1).jpeg (195.67 KiB) Viewed 13421 times

: WhatsApp Image 2025-01-15 at 15.31.58.jpeg (207.21 KiB) Viewed 13421 times

RICE RACING · Post by **RICE RACING** » Sun Jan 19, 2025 4:40 am

For all the MoWreC mother loverz out there I have completed the work on the 'Jimz Bagz' MoWreC supplied #57007 sensor
this is proven to work on methanol now as shown below, each one comes with its own sensor calibration (sensor name file and custom table), reach around to me and I will accommodate you....

I have some other arousing developmentz coming which will make everyone hard, stay tuned.

: V2 4.jpg (89.22 KiB) Viewed 13400 times

: V2 3.jpg (102.22 KiB) Viewed 13400 times

: V2 2.jpg (102.42 KiB) Viewed 13400 times

RICE RACING · Post by **RICE RACING** » Sun Jan 19, 2025 4:55 am

Syvecs L2C and 8 x donmega calibrated NTK's PnP into MoWreC, easy as

: MoWreC AIDZ800 L2C 8 channelz.jpg (395.25 KiB) Viewed 13387 times

RICE RACING wrote: ↑Sun Jan 19, 2025 1:27 am can run all 8 go ahead and try

WhatsApp Image 2025-01-15 at 19.13.05.jpeg

WhatsApp Image 2025-01-15 at 19.13.03(1).jpeg

WhatsApp Image 2025-01-15 at 15.31.58.jpeg

RICE RACING · Post by **RICE RACING** » Thu Jan 30, 2025 12:17 am

something is coming KUNTZ

well its already done and proven but will water board a few people over time just for fun !
LAMBDA MASTER

: ball licker 5000.jpeg (139.43 KiB) Viewed 12373 times

: ball licker 5000 haha.jpeg (183.53 KiB) Viewed 12373 times

: ball licker 5000 POWNED.jpeg (140.28 KiB) Viewed 12373 times

RICE RACING · Post by **RICE RACING** » Thu Feb 06, 2025 6:39 am

Just a small sample of the RR bench sensors, could not fit all in pic as 3 on test rig and another 2 on the ETAS meter
14! of these kuntz all up.......
A few of the 'leb grade' with cal cert are $1200 USD each !
and 7 high end meterz, a few I have $12,000+ USD each !
some talk about testing, others do it for real, no arsebook

Stay tuned for some fact v fiction debunking coming soon, not via 'claimed' industry expurtz, on pay to play, 5 day cert online coursez, GagTube entertainerz selling you food productz, hair balding treatments, or vitaminz etc etc........