Page 1 of 1
kelford V2-199-C cams
Posted: Fri Aug 21, 2020 10:21 am
by garyf
Hi Im fitting some kelford V2-199-C cams, engine is a 2.5, does anyone have any base clossed loop vvt figures for these cams? I have a feeling they will be nothing like the std figures for the sti7 cams, just something sensible to get me going.
Re: kelford V2-199-C cams
Posted: Fri Oct 09, 2020 8:40 pm
by gazzasti1
hi
setup your offsets when warm at right rpm and then tune the car to suit .
standard tuning tbh .
Re: kelford V2-199-C cams
Posted: Fri Oct 09, 2020 8:41 pm
by gazzasti1
also if your unsure on drive target being right.
take the vvt soleniods out of equation by unplugging easy to get them right
Re: kelford V2-199-C cams
Posted: Tue Oct 13, 2020 1:19 pm
by garyf
Hi cheers Im fine with the latch points, it was the amount of advance I should target I wasnt sure about since these cams have way more duration than the std sti cams. I was just looking for a safe figure to get me running, the std cams are around 35 - 40 degress on my setup, Ive gone for 11 degrees with these and alls good.