NTK Lambda Sensors for L2C
Posted: Thu Apr 02, 2026 2:34 pm
Thought this might be of use to put up here.
I have been using a host of NTK sensors on the L2C all of which have worked well.
Each type has its place with varying benefits, for those who want to read a bit about what I have done there is a few pages in this link, been going at it on the ECU side for over 10 years and on the L2C since the early prototype boards, one of which I still have going on my cal bench.
Testing and calibration of sensors > http://www.syvecs.co.uk/forum/viewtopic ... &start=140
I have been using a host of NTK sensors on the L2C all of which have worked well.
- 4mA
- 6mA
Each type has its place with varying benefits, for those who want to read a bit about what I have done there is a few pages in this link, been going at it on the ECU side for over 10 years and on the L2C since the early prototype boards, one of which I still have going on my cal bench.
Testing and calibration of sensors > http://www.syvecs.co.uk/forum/viewtopic ... &start=140