The latest Nissan R35GTR AWD Base map which matches the latest firmware can be found below in Attachments
Please note this is only a base file for the device and we recommend you speak with your dealer about calibrating the unit based on the car setup.
Latest Base Map
Latest Base Map
- Attachments
-
- AwdBase_GTR 1.14.SC
- (37.21 KiB) Downloaded 5843 times
1.18
1.18 Base map, must be used with 1.18 Firmware
- Attachments
-
- AwdBase_GTR 1.18.SC
- (42.89 KiB) Downloaded 5538 times
1.21 Base Map
For use with 1.21 Firmware
- Attachments
-
- AwdBase_GTR 1.21.SC
- (46.26 KiB) Downloaded 5484 times
1.23 Base Maps
In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.23 Firmwares
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.23 Firmwares
- Attachments
-
- AwdBase_GTR 1.23.SC
- (51.46 KiB) Downloaded 5711 times
-
- AwdBase_GTR 1.23 X4.SC
- (51.46 KiB) Downloaded 5257 times
1.24 Base Maps
In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.24 Firmwares
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.24 Firmwares
- Attachments
-
- AwdBase_GTR 1.24.SC
- (55.83 KiB) Downloaded 5490 times
-
- AwdBase_GTR 1.24 X4.SC
- (55.78 KiB) Downloaded 5470 times
1.25
For use with 1.25 firmware on X4AWD Units
- Attachments
-
- AwdBase_GTR 1.25 X4.SC
- (61.05 KiB) Downloaded 5138 times
Re: Latest Base Map
In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.27 Firmwares
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.27 Firmwares
- Attachments
-
- AwdBase_GTR 1.27.SC
- (66.84 KiB) Downloaded 3407 times
-
- AwdBase_GTR 1.27 X4.SC
- (66.87 KiB) Downloaded 3341 times
Re: Latest Base Map
For use with 1.28 Firmwares
- Attachments
-
- AwdBase_GTR 1.28 X4.SC
- (72.44 KiB) Downloaded 2928 times
Re: Latest Base Map
1.29 Base map
- Attachments
-
- AwdBase_GTR 1.29 X4.SC
- (72.89 KiB) Downloaded 2079 times